4000 Switch Startup

4000 Switch Startup
The 4000 series switch loads the software image from flash and then asks you to enter a password,
even if there isn’t one set. Press Enter, and you will see a Console> prompt. At this point,
you can enter Enable mode and configure the switch by using set commands:
BOOTROM Version 5.1(2), Dated Apr 26 1999 10:41:04
BOOT date: 08/02/02 BOOT time: 08:49:03
Uncompressing NMP image. This will take a minute...
Downloading epld sram device please wait ...
Programming successful for Altera 10K10 SRAM EPLD
Updating epld flash version from 0000 to 0600
Cisco Systems Console
Enter password: [Press return here]
2001 Mar 22 22:22:56 %SYS-5-MOD_OK:Module 1 is online
2001 Mar 22 22:23:06 %SYS-5-MOD_OK:Module 2 is online
Console>