Catalyst 4000 Series

Catalyst 4000 Series
To configure VLANs on a Catalyst 4000 switch, use the
set
vlan
vlan#
name
vlan_name
command.
Then, after your VLANs are configured, assign the ports to each VLAN:
Terry_4000> (enable)
set vlan 2 name Sales
Vlan 2 configuration successful
After the VLAN is configured, use the
set vlan vlan# slot/ports command:
Terry_4000> (enable) set vlan 2 2/1-2
VLAN Mod/Ports
---- -----------------------
2 1/1-2
2/1-2
Please configure additional information for VLAN 2.
Terry_4000> (enable)
The additional information the switch wants you to configure is the VLAN Trunk Protocol
(VTP) information. (VTP and trunking are covered in more detail at the end of this chapter,
where we will continue with the 4000 switch VLAN configuration.) The 4000 series switch
enables you to configure as many ports as you wish to a VLAN at one time.