Verifying the VTP Domain

Verifying the VTP Domain
First, you should verify which VTP domain the interface belongs to. This is done with the show
vtp domain command from the switch. You can also obtain this information by looking at the
switch configuration. Here are the two examples:
Terry_6509> show vtp domain
Domain Name Domain Index VTP Version Local Mode Password
----------- ------------ ----------- ---------- --------
test 1 2 server -
Vlan-count Max-vlan-storage Config Revision Notifications
---------- ---------------- --------------- -------------
7 1023 2 disabled
Last Updater V2 Mode Pruning PruneEligible on Vlans
-------------- -------- -------- -------------------------
172.16.10.1 disabled disabled 2-1000
Terry_6509>
Terry_6509> (enable) show running-config
566 Chapter 18  Multilayer Switching (MLS)
.....
.........
.........
.........
.........
..
-- omitted text --
!
#vtp
set vtp domain test
set vtp mode server