Configuring Cisco Secure ACS and TACACS+

Basic Cisco Secure ACS configuration for TACACS+ support is performed using the Interface Configuration button on the ACS HTML interface. The interface settings enable you to display or hide TACACS+ administrative and accounting options. You can simplify the HTML interface by hiding the features you don’t use. Figure 4-13 shows configuring TACACS+ options and features.

The TACACS+ section includes three areas:

To configure the user interface for TACACS+ options, follow these steps:

1. Click the Interface Configuration button.

2. Click TACACS+. The TACACS+ Interface Configuration section appears.

3. In the TACACS+ Services table, select the check box for each TACACS+ service you want displayed on the applicable setup page.

4. To add new services and protocols, follow these steps:

   1. In the New Services section of the TACACS+ Services table, type in the Service and Protocol to add.

   2. Use the appropriate check box to select those to be displayed for configuration either under User Setup or Group Setup, or both.

5. In the Advanced Configurations Options section, select the check boxes of the display options you want to enable.

6. When you finish setting TACACS+ interface display options, click Submit. The selections made in this procedure determine what TACACS+ options Cisco Secure ACS displays in other sections of the HTML interface.