Configuring Cisco VPN 3002 Remote Clients Questions Answers

1. 

What is another name for VPN PAT mode?

1. Network Extension mode

2. Client mode

3. Network Extension Mode per Group

4. Split tunnel mode

2. 

Which of the following is not an IPSec implementation used by the VPN 3002?

1. IPSec over TCP

2. IPSec over UTP

3. IPSec over NAT-T

4. IPSec over PPTP

3. 

The VPN 3002 CLI is most like which of the following?

1. Cisco IOS routers

2. Cisco Catalyst 5000 and 6000 switches

3. The PIX Firewall

4. None of the above

4. 

Which one of the following is not one of the three main menu sections for the VPN 3002?

1. Monitoring

2. Reporting

3. Configuration

4. Administration

5. 

What is the command to upgrade the VPN 3002 software?

1. copy tftp flash

2. copy tftp nvram

3. copy tftp backup

4. None of the above

6. 

Which of the following is a growing protocol for connecting ISPs through broadband connections like DSL/cable systems?

1. PPP

2. PPPoE

3. Ethernet

4. BGP

7. 

What is the first feature(s) set with Quick Configuration?

1. Upload an Existing Configuration file

2. Configure the Public Interface

3. Set the System Time, Date, and Time Zone

4. Configure DNS

8. 

Where might the DHCP Server feature be configured on the VPN 3002?

1. Public interface

2. Private interface

3. Public or private interfaces

4. None of the above

9. 

In which two cases would PAT always be used on outbound traffic?

1. Network extension mode

2. Split tunnels

3. Client mode

4. PPPoE

10. 

Which feature can be configured on either the VPN 3002 or the Concentrator?

1. Interactive Unit Authentication

2. IPSec Server Load Balancing

3. Individual User Authentication

4. IPSec backup servers

11. 

Which feature requires Virtual Cluster protocol configuration?

1. Interactive Unit Authentication

2. IPSec Server load balancing

3. Individual User Authentication

4. IPSec backup servers

12. 

Reverse Route Injection refers to which of the following?

1. Inserting main network routes in remote network route tables

2. Making main network routes available to all remote VPN clients

3. Inserting remote network routes in main network route tables

4. Exchanging routes both ways between main and branch networks

13. 

Which Cisco protocol allows wireless users to authenticate over VPN links?

1. NAT Traversal (NAT-T)

2. LEAP Bypass

3. RRI

4. PPPoE

14. 

Which of the following is not supported by Client Update features?

1. VPN Software

2. Firmware on VPN 3002

3. Push Banner to VPN 3002

4. VPN configurations

15. 

Which of the following might create problems for wireless users behind the VPN 3002?

1. IPSec over NAT-T

2. Interactive Hardware Client Authentication

3. Individual User Authentication

4. AES Support and Diffie-Hellman Group