Header
Home | Set as homepage | Add to favorites
  Search the Site     » Advanced Search
Sections
Syndication


Blogroll:

||||| ALL Cisco-Network ARTICLES |||||  
CCIE Journey,
The CCIE Journey,


Step 4-4 Display the Configured Crypto Maps

Sep 27,2009 by alperen

image

Step 4-4 Display the Configured Crypto Maps

Use the show crypto map command to display the crypto map configuration. The two optional parameters allow showing only the crypto map set applied to the specified interface or the crypto map set associated with the specified map-name. The syntax is as follows:

Rtr1#show crypto map [interface interface | tag map-name]

Rtr1#show crypto map
Crypto Map "testmap" 50 ipsec-isakmp
       Description: VPN Link to branch office in Tacoma, WA
       Peer = 10.0.50.2
       Extended IP access list 125
           access-list 125 permit tcp 192.168.0.0 0.0.127.255 192.168.130.0
  0.0.0.255
       Current peer: 10.0.50.2
       Security association lifetime: 2300000 kilobytes/1800 seconds
       PFS (Y/N): Y
       DH group:  group2
       Transform sets={ CPU-HOG, }
       Interfaces using crypto map testmap:
                Serial0
Rtr1#

Step 4-5 Debug IKE Events

Rtr1#debug crypto isakmp
Crypto ISAKMP debugging is on
Rtr1#

Step 4-6 Debug IPSec Events

Rtr1#debug crypto ipsec
Crypto IPSEC debugging is on
Rtr1#

674 times read

Related news

» Cisco IOS IPSec for Preshared Keys Review
by alperen posted on Sep 29,2009
» Step 3-5 Apply the Crypto Maps to the Interface
by alperen posted on Sep 27,2009
» Step 1-4 Check the Current Configuration
by alperen posted on Sep 27,2009
» Cisco IOS IPSec Certificate Authority Support Review
by alperen posted on Oct 02,2009
» Step 3-4 Configure Crypto Maps
by alperen posted on Sep 27,2009
Did you enjoy this article?
(total 0 votes)

comment Comments (0 posted) 

More Top News
CCSP-Cisco Certified Security Professional
Most Popular
Most Commented
Featured Author