Header
Home | Set as homepage | Add to favorites
  Search the Site     » Advanced Search
Sections
Syndication


Blogroll:

||||| ALL Cisco-Network ARTICLES |||||  
CCIE Journey,
The CCIE Journey,


CGMP Command Summary

Oct 28,2010 by alperen

image

CGMP Command Summary  
  Tables 4-2 and 4-3 contain a summary of the router and switch commands pertaining to CGMP. The router command, ip cgmp proxy, will be covered in Chapter 5, “Distance Vector Multicast Routing Protocol.”  
  Table 4-2: Router CGMP Command Summary  
 
 
  Command  
Description  
 
 
 
  ip cgmp  
Enables CGMP on an interface or subinterface  
 
  ip cgmp proxy  
Enables CGMP and DVMRP proxy on an interface or subinterface  
 
  clear ip cgmp [interface]  
Clears all CGMP groups  
 
  show ip igmp interface [interface]  
Shows if CGMP is enabled on an interface  
 
  debug ip cgmp  
Debugs CGMP traffic  
 
 
 
  Table 4-3: Switch CGMP Command Summary  
 
 
  Command  
Description  
 
 
 
  set cgmp enable  
Enables CGMP on the switch  
 
  set cgmp disable  
Disables CGMP on the switch  
 
  show multicast router  
Lists the ports on the switch that are router ports  
 
  show multicast group  
Displays active groups  
 
  clear cgmp statistics  
Clears the CGMP statistics  
 
  debug ip cgmp  
Debugs CGMP traffic  
 
 
 
  Example  
  View the switch CGMP statistics for VLAN 2  
  switch. show cgmp statistics 2  
  CGMP enabled  
  CGMP statistics for vlan 2:  
  valid rx pkts received257  
  invalid rx pkts received0  
  valid cgmp joins received252  
  valid cgmp leaves received5  
  valid igmp leaves received0  
  valid igmp queries received0  
  igmp gs queries transmitted0  
  igmp leaves transmitted0  
  failures to add GDA to EARL0  
  topology notifications received0  
  number of packets dropped0  
  Example  
  Verify the CGMP is enabled on the router  
  routerashow ip igmp interface ethernet 0  
  Ethernet0 is up, line protocol is up  
  Internet address is 172.16.4.3/24  
  IGMP is enabled on interface  
  Current IGMP version is 2  
  CGMP is enabled on interface  
  IGMP Query Interval is 60 seconds  
  IGMP Querier Timeout is 120 seconds  
  IGMP Max. Query Response Time is 10 seconds  
  Inbound IGMP Access group is not set  
  IGMP activity: 4 joins, 2 leaves  
  Multicast routing is enabled on interface  
  Multicast TTL threshold is 0  
  Multicast Designated Router (DR) is 172.16.4.3 (this system)  
  IGMP Querying router is 172.16.4.1  
  Multicast groups joined (number of users):  
  224.0.1.40(1) 225.250.250.1(1) cp5
 

 


312 times read

Related news

No matching news for this article
Did you enjoy this article?
(total 0 votes)

comment Comments (0 posted) 

More Top News
CCSP-Cisco Certified Security Professional
Most Popular
Most Commented
Featured Author