Configuring MLS on the RSM

Configuring MLS on the RSM

RSM(config)#mls rp ip

RSM(config)#int vlan2

RSM(config-if)#mls rp vtp-domain Cisco

RSM(config-if)#mls rp ip

RSM(config-if)#mls rp management-interface

RSM(config-if)#int vlan 3

RSM(config-if)#mls rp vtp-domain Cisco

RSM(config-if)#mls rp ip

MLS-5-ROUTERADD:Route Processor 10.1.2.10 a Dded

The syslog message in Example 6-3 is generated when the switch finds the Route Processor (RP) through MLSP.

In Example 6-4, the MLS entry has been defined per destination, which is the default for the Catalyst switch. As noted in the output, the destination IP addresses are given with their associated VLAN and port numbers.