Output of the show interfaces port-channel and show interfaces trunk Commands on SW1

Output of the show interfaces port-channel and show interfaces trunk Commands on SW1

SW1#show interfaces port-channel 1

Port-channel1 is up, line protocol is up

  Hardware is EtherChannel, address is 0009.1267.9ffa (bia 0009.1267.9ffa)

  MTU 1500 bytes, BW 400000 Kbit, DLY 100 usec,

     reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  Full-duplex, 100Mb/s

  Members in this channel: Fa10/11 Fa10/12 Fa10/13 Fa10/14

!output truncated



SW1#show interfaces trunk



Port      Mode         Encapsulation  Status        Native vlan

Po1       desirable    802.1q         trunking      1



Port      Vlans allowed on trunk

Po1       1,401-402



Port      Vlans allowed and active in management domain

Po1       1,401-402



Port      Vlans in spanning tree forwarding state and not pruned

Po1       1,401-402

SW1#

The bandwidth reported on the channel is 400000 Kbit, and the members of the channel are listed in the output