Creating a Static CAM Entry

Switch1 (enable) set cam static 01-00-5e-01-01-01 10/1 3

Static multicast entry added to CAM table.

Switch1 (enable) show mac 10/1

Port     Rcv-Unicast          Rcv-Multicast        Rcv-Broadcast

-------- -------------------- -------------------- --------------------

10/1                        2                    5                    0

Port     Xmit-Unicast         Xmit-Multicast       Xmit-Broadcast

-------- -------------------- -------------------- --------------------

10/1                        1                13766                    0

Port     Rcv-Octet            Xmit-Octet

-------- -------------------- --------------------

10/1                      504             20684066

Realistically, manually associating ports with specific multicast streams is not a viable option. Each time a new multicast stream is generated, manual intervention is required to configure specific ports to receive the traffic. In a different situation, if Host3 now wants to receive 239.1.1.1 traffic or Host2 no longer wants the traffic, this, too, must be manually configured. Multicast support on a switch needs to be efficient, dynamic, and relatively easy to implement.